DIY Wooden Bird Feeder | How to Build It in Simple Steps 2026

By building a DIY wooden bird feeder, you can enjoy the presence of little birds without subjecting them to a miserable captivity. It's about inviting them to lunch in a reserved dining room, within sight and sound, but where the guests are free to come and go as they please: a bird feeder to hang from a tree branch or mount on a pole near your windows, far enough away for the birds to feel safe but close enough for you to watch them.

Essentially, it's a cabin shaped like a Canadian tent, with a base of about 300×500 mm and two sloping sides at 45°. The most suitable material is natural wood, at most waterproofed on the slopes with a few coats of linseed oil. The slopes are joined to each other and to the floor with triangular strips (those from fruit crates work great).

The floor/tray of the DIY bird feeder protrudes symmetrically beyond the roof slopes (many birds would be afraid to enter and eat under the roof), and the two protruding parts are edged with strips to prevent the feed from falling off before being consumed. For less courageous birds, the food needs to be in the open, not under the roof. That's why the feeder floor extends beyond the roof. If you don't have time for construction, you can always opt for ready-made bird feeder kits from our garden supplies collection.

Not sure what to feed the birds? Discover the most suitable birdseed mixes in our garden supplies range.

What You Need to Build a Bird Feeder

• Natural wood or 25 mm thick poplar plywood: one floor piece 300×500 mm
• Two roof slope pieces 220×320 mm
• Triangular section strip with 45° angles: three pieces 220 mm long
• Strip section 10×40 mm: about 1.2 meters
• Stainless steel nails or screws
• One screw eye with M6x60 mm shank, plus two nuts and two washers

DIY Construction Steps

Step 1: Prepare the Base and Roof

Cut your plywood to size for the floor (300×500 mm) and the two roof panels (220×320 mm). Sand all edges smooth to avoid splinters. For a durable finish, consider treating the wood with linseed oil—you can find wood treatment supplies in our home improvement collection.

Step 2: Assemble the Roof

Join the two roof panels at a 45° angle using the triangular strips. Apply wood glue and secure with stainless steel nails or screws. The ridge should form a clean peak.

Step 3: Attach the Roof to the Base

Center the roof assembly on the base. The floor should protrude equally on both sides (about 90 mm each). Secure the roof to the base using small brackets or by screwing through the base into the roof strips. This creates the classic overhang that protects food from rain while giving shy birds access to open feeding areas.

Step 4: Add Edging Strips

Cut your 10×40 mm strips to fit around the protruding edges of the floor. Nail or screw them in place to create a shallow tray that keeps seeds from falling off. This is essential for keeping your feeding station tidy.

Step 5: Install the Hanging Eye

Drill a pilot hole in the center of the roof peak. Insert the screw eye with M6x60 mm shank, securing it with two nuts and two washers (one inside, one outside). This creates a sturdy hanging point. For pole mounting, you can instead attach the base to a post using outdoor mounting hardware from our patio furniture collection.

Step 6: Final Touches

Apply a second coat of linseed oil or a non-toxic wood sealant. Allow to dry completely before filling with birdseed. Place your feeder near a window for easy viewing—perhaps on a pergola or gazebo for a charming garden focal point.

Where to Place Your Bird Feeder

• Hang from a sturdy tree branch using a strong rope or chain
• Mount on a dedicated pole in a quiet garden area
• Place near a window but at least 1 meter away to prevent window collisions
• Position near shrubs or trees for quick escape cover

Feeding Tips for Happy Birds

• Use high-quality birdseed mixes—avoid cheap fillers like milo or wheat
• Clean your feeder every two weeks to prevent mold and disease
• Offer different seed types: sunflower hearts for finches, nyjer for goldfinches, and peanuts for woodpeckers
• Provide fresh water nearby in a decorative birdbath from our outdoor decor collection

Frequently Asked Questions

How long does it take to build this bird feeder?

Most DIYers can complete this project in 2–3 hours, including drying time for glue and sealant.

What type of wood is best for a bird feeder?

Cedar, redwood, or untreated pine are excellent choices. Avoid pressure-treated wood as the chemicals can harm birds. Poplar plywood, as suggested, works well when properly sealed.

Can I paint my bird feeder?

Yes, but use only non-toxic, water-based paints or stains. Birds may chew on the wood, so avoid any finishes containing lead or other harmful chemicals.

How do I keep squirrels away from the feeder?

Place the feeder on a smooth pole with a baffle, or hang it from a thin wire at least 10 feet from trees. You can also offer squirrel-friendly food in a separate squirrel feeder from our garden supplies to distract them.

Should I feed birds year-round?

Yes! Birds need reliable food sources in all seasons—especially during winter when natural food is scarce, and in spring when they're feeding young. A well-stocked feeder can be complemented by starting a greenhouse to grow native plants that provide natural seeds.

For more garden projects and supplies, explore our full range of garden supplies, outdoor furniture, and home improvement tools at GrandGoldman.com.

Browse Grand Goldman Home Decor

Discover unique craftsmanship home decor and furniture at the Grand Goldman Shop.