DIY Light Panel: Decorate with Spotlights and a Console 2026

Create a cheerful and original light point by mounting a light panel with LED spotlights and a wooden console against the wall, surrounded by colorful corollas. Here's how to make it yourself.

This light panel with spotlights and a wooden console fits perfectly in a corner of the living room or entryway. No special electrical or carpentry skills are needed, and the tools and work involved are minimal. You just need to cut the panel to your preferred size—it can even be reclaimed, since it will be covered with decoration.

Wall Light Panels

Drill the light panel with a hole saw to insert the nine spotlights. The holes are Ø 38 mm, but you can choose lights of different sizes as long as they aren't too large. The small table is made from a semicircular cut board, while the leg—if you don't have a reclaimed one—can be purchased pre-shaped. Attach the tabletop and leg to the panel using wooden dowels and glue.

Wall light panels are ideal for placing in a corner of the living room or entryway. The spotlights fit into the holes, and the electrical wires remain hidden at the back. The system can be connected to a power outlet via a plug or have a switch at a certain height on the back of the panel. Decorate the light point with tempera paints using stencils that reproduce flowers, stars, or other motifs. Protect the tabletop and leg with a coat of wood stain.

DIY LED Panel: The Project

No special materials or tools are required; the spotlights are connected in parallel and then to the transformer and plug. You'll need these supplies, all available at a hardware store:

• a 600x2000x10 mm plywood panel
• a 250x500x25 mm solid wood board
• a shaped wooden leg
• Ø 8 mm dowels
• Ø 12 mm dowel
• 3.5×40 screws
• wood glue
• wood stain
• paint in various colors
• three-wire electrical cable
• nine spotlights

For a similar project, you might also want to explore wall decor to complement your panel, or check out rugs and curtains to complete the room's ambiance. If you need additional storage near your new light panel, consider bookcases and shelving units or a storage bench.

Step-by-Step DIY Execution

Start by cutting the plywood panel to your desired dimensions. Use a hole saw to drill nine evenly spaced holes for the spotlights. Sand the edges smooth. Paint the panel with tempera colors using stencils for a floral or star pattern. Let it dry completely.

Next, prepare the console: cut the solid wood board into a semicircle (or keep it rectangular if you prefer). Sand and stain the board and the shaped leg. Attach the leg to the board using dowels and wood glue. Then attach the console to the bottom of the panel with screws and glue.

For the electrical part, connect the nine spotlights in parallel using the three-wire cable. Attach the cable to a transformer and plug. Mount the spotlights into the holes from the back, securing them with the provided clips. Hide the wiring behind the panel. Finally, plug it in and enjoy your new light point.

FAQ

Can I use LED strips instead of spotlights?

Yes, you can adapt the design to use LED strips for a different effect, but you'll need to modify the drilling and mounting steps.

What size should the panel be?

It depends on your space. A 600x2000 mm panel works well for a corner, but you can adjust it. For a larger room, you might pair it with a sofa or dining table.

Do I need an electrician?

No, this project uses low-voltage LED spotlights and a plug-in transformer, making it safe for DIY. However, if you're unsure, consult an electrician.

Can I use this panel outdoors?

This design is for indoor use. For outdoor lighting, check out outdoor lighting and outdoor decor.

How do I clean the panel?

Wipe gently with a dry cloth. Avoid water near the electrical parts.

Browse Grand Goldman Home Decor

Discover unique craftsmanship home decor and furniture at the Grand Goldman Shop.

Best Products We’ve Tested and Rated

Our testing team has hands-on reviews of pickleball paddles intermediate players, vape juice canada, baby cribs, portable apple carplay, and tasers women. Every option below was compared across price, build quality, and real-world performance, with honest pros and cons. We update these guides regularly as new models arrive, so the recommendations stay current.

Our testing team has hands-on reviews of stun gun personal defense, convertible cribs, beginner model ship kits, hepa vacuum lead dust, and electric tricycle adults. Every option below was compared across price, build quality, and real-world performance, with honest pros and cons. We update these guides regularly as new models arrive, so the recommendations stay current.