Building a DIY wooden gate isn't complicated. By analyzing the project, we see that the structure of the two doors is divided horizontally into two parts. The blind part, located in the lower half, consists of a frame whose openings are closed by marine plywood panels framed on both sides with strips cut at 45°; the upper part is delimited at the top by a framed cornice inside which planks are arranged vertically, spaced apart so as not to weigh down the gate's aesthetics too much. The sturdy iron posts are covered with thick boards and firmly anchored to a concrete support; the structure is made entirely with tenons and mortises.
How to Build a DIY Wooden Gate – What You Need
- For post cladding: 8 pieces of 2000 mm spruce lath, section 240×50 mm
- For the structure: Spruce lath section 90×60 mm: 2 pieces of 1950 mm, 4 of 570 mm, 2 of 1650 mm, 2 of 300 mm
- For the lower part: Spruce lath section 70×60 mm: 2 pieces of 1500 mm. Spruce lath section 50×50 mm: 8 pieces of 380 mm, 4 of 1430 mm. Marine plywood 18 mm: 8 pieces of 45×32 mm, 4 of 32×32 mm. Strips 10×25 mm: 8 pieces of 45 mm, 24 of 32 mm. Wooden dowels ø 12 mm
- For the upper part: Planed spruce boards 20×85 mm: 6 pieces of 110 mm, 4 of 100 mm, 6 of 85 mm
- Iron material: Square tube 130x130x3 mm, height 1850 mm for the two posts, 2 plates 250×250 mm for the base to be fixed with threaded bar Ø 16×25 mm and nuts, 2 weld-on hinges, 2 ball hinges with plate
- Finishes: Impregnating agents and water-based paints
Designing a Wooden Gate

Before you start, measure your opening carefully. A well-planned gate not only looks better but also functions smoothly for years. Consider the overall style of your property – rustic, modern, or traditional – and choose materials that complement your home's exterior. For a cohesive look, browse our home improvement collection for inspiration on matching hardware and finishes.
Gate Door Assembly
Time required: 8 hours
Form the support framework of the doors
After planing all the pieces, and having created the tenons and mortises, we stain them and position them to form the support framework of one door, before making the joints and proceeding with gluing.
Assemble and glue
We firmly clamp the frame of the lower part of the doors with clamps. Make sure everything is square before the glue sets. For a professional finish, consider adding decorative elements from our wall decor collection to match your gate's style.
Install the plywood panels
Fit the marine plywood panels into the lower frame openings. Secure them with the pre-cut strips at 45°, nailing or screwing from the back. Marine plywood is chosen for its excellent resistance to moisture and rot, making it ideal for outdoor projects.
Build the upper slatted section
Create the top frame and install the vertical planks with even spacing. This open design reduces wind load and adds visual lightness. If you're also working on your patio, our outdoor patio furniture collection has pieces that pair beautifully with a rustic wooden gate.
Attach the iron posts and hinges
Set the square tube posts in concrete, ensuring they are perfectly plumb. Once cured, clad them with the thick spruce boards. Weld or bolt the heavy-duty hinges to the posts, then hang the gate doors. Adjust for smooth operation.
Apply finishes
Sand all surfaces smooth and apply a wood preservative or outdoor paint. This step is crucial for longevity. For the surrounding area, consider adding outdoor lighting to highlight your new gate at night.
FAQ
What type of wood is best for an outdoor gate?
Spruce (fir) is a good choice for its strength and affordability, especially when treated. Cedar and redwood are naturally rot-resistant but more expensive. For the best results, always use pressure-treated or naturally durable wood for ground contact parts.
Do I need a concrete foundation for the posts?
Yes, for a gate this size and weight, a concrete base is essential. It prevents shifting, sagging, and keeps the gate aligned over many years. Use a post hole digger and set the posts below the frost line in your area.
How do I prevent the gate from sagging?
Use strong mortise and tenon joints, diagonal bracing, and heavy-duty hinges. The design in this article uses a robust frame and marine plywood to resist warping. Also, ensure your posts are perfectly plumb and the hinges are securely attached.
Can I automate this gate?
Absolutely! You can retrofit a solar-powered or electric gate opener. Just make sure the gate is balanced and swings freely before installation. For the tools and supplies, check our garden supplies collection for heavy-duty hardware.
How long will a wooden gate last?
With proper construction, good drainage, and annual maintenance (cleaning and resealing), a wooden gate can last 15-20 years or more. Using outdoor decor accessories like finials can also help protect the top edges from moisture.
Browse Grand Goldman Home Decor
Discover unique craftsmanship home decor and furniture at the Grand Goldman Shop.
Best Products We’ve Tested and Rated

Our testing team has hands-on reviews of rod reel combo, line, baitcast reel, reels freshwater saltwater, and sunglasses. Every option below was compared across price, build quality, and real-world performance, with honest pros and cons. We update these guides regularly as new models arrive, so the recommendations stay current.
Our testing team has hands-on reviews of kayak, braided line, bass lures, catfish bait, and gaming chairs comfort support. Every option below was compared across price, build quality, and real-world performance, with honest pros and cons. We update these guides regularly as new models arrive, so the recommendations stay current.