DIY Umbrella Stand: A Clever Cone Design for 6 Umbrellas 2026

This clever DIY umbrella stand keeps your entryway tidy with six cone-shaped pockets that hold umbrellas upright and easy to grab. With a wooden base and clear plastic cones, it's a stylish, space-saving project. Browse home improvement essentials to get started.

Looks Like an Umbrella and Holds 6 with Minimal Space – The DIY Umbrella Stand

This capacious umbrella stand consists of conical pockets of different heights, each holding a single umbrella for easy placement and removal. The structure includes a circular wooden base supporting a central rod made from grooved wooden dowel, to which six pockets made from clear plastic sheets are attached.

Base and Rod

Use 28 mm thick laminated wood to cut a Ø 250 mm disc with a jigsaw. Drill a 28 mm diameter hole at the center. The main support is a Ø 28 mm wooden dowel, 750 mm long. When buying, have a 3 mm wide longitudinal cut made from the bottom end up to 80 mm from the top. Find garden supplies and tools for this project.

Plastic Cones

The container is made from six plastic sheets cut into triangles and folded into cones. The triangle size must match the rod height. Rigid plastic sheets are available at stationery or DIY stores for a few euros per square meter. Pair with wall decor for a complete entryway look.

Inserting the Cones

Once all triangles are cut (3 large, 3 small), fold them into cones and staple a few points to hold them together. The overlapping stapled edge should be inserted into the rod's longitudinal cut (from the bottom) and glued in place with mounting adhesive. Add lighting to highlight your creation.

Materials and Tools Checklist

• 28 mm thick laminated wood for base
• Ø 28 mm wooden dowel, 750 mm long
• Rigid clear plastic sheets (approx. 1 m² total)
• Jigsaw, drill, stapler, mounting adhesive
• Sandpaper and wood finish (optional)

Step-by-Step Instructions

1. Cut a Ø 250 mm disc from laminated wood and drill a 28 mm center hole.
2. Have a 3 mm wide, 670 mm long groove cut into the dowel (from bottom to 80 mm from top).
3. Cut 3 large and 3 small triangles from plastic sheets (base width ~200 mm for large, ~150 mm for small; height ~400 mm and ~300 mm respectively).
4. Fold each triangle into a cone, overlapping edges, and staple.
5. Slide each cone's stapled edge into the dowel groove from the bottom, spacing them evenly.
6. Apply mounting adhesive inside the groove to secure cones.
7. Insert the dowel into the base hole and secure with wood glue or a screw from underneath.
8. Let dry completely before use.

Frequently Asked Questions

Can I use different materials for the cones?

Yes, you can use fabric, thin metal, or even recycled plastic bottles cut into shapes. Explore outdoor decor ideas for inspiration.

How do I clean the plastic cones?

Wipe with a damp cloth and mild soap. Avoid abrasive cleaners that may scratch the plastic.

Can I make this stand taller or shorter?

Adjust the dowel length and cone heights proportionally. For a compact version, use a 600 mm dowel. See storage bench options for more entryway solutions.

What type of glue works best for plastic?

Use a strong plastic adhesive or epoxy. Mounting adhesive works well for bonding plastic to wood.

Is this stand stable for heavy umbrellas?

Yes, the wide wooden base provides stability. For extra weight, add a metal disc or fill the base with sand. Check patio furniture for complementary outdoor storage.

Why This DIY Umbrella Stand Works

• Space-saving: holds 6 umbrellas in a small footprint.
• Easy access: each umbrella has its own pocket.
• Customizable: choose plastic colors or add decorative trim.
• Budget-friendly: uses inexpensive materials.

Transform your entryway with this practical project. Add a rug to catch drips and curtains for a cozy feel. For more DIY storage ideas, browse shelving units or nightstands that double as organizers.

Browse Grand Goldman Home Decor

Discover unique craftsmanship home decor and furniture at the Grand Goldman Shop.