Build a DIY Outdoor Log Store with Canopy 2026

Summer is the season for sourcing and storing the firewood needed to feed stoves and fireplaces during the cold months, and you shouldn't delay in building up a good supply. But what's often missing isn't the wood—it's the space.

Even if some have elevated stacking logs to a pure aesthetic exercise, a pile of firewood leaning against the house wall doesn't look great and doesn't help the fuel quality either. Damp wood struggles to burn and creates smoke.

To solve this double problem, we can build a DIY outdoor log store, complete with a canopy to keep the wood dry and hidden from critical eyes.

Louvers and Slats

The outdoor log store consists of a series of modular side frames—at least two—joined at the bottom by crossbars to support the firewood, and at the top by boards forming the roof slope. In our case, with three frames, we obtained two storage units occupying a space of about 2000×1150 mm.

The walls are made of louvered panels formed by slats measuring 18×45 mm: this structure promotes air circulation, necessary to keep the wood dry, while hiding the firewood stock from view. The front panels also act as doors, with three hinges installed on each support frame.

For your own project, consider browsing our home improvement collection for essential tools and materials.

Canopy for the Log Store

The roof of the wooden log store is built with 22×96 mm tongue-and-groove planks, easy to align and lock onto the beams. Waterproofing is provided by sheets of bitumen membrane coated with pigmented minerals, which prevents water infiltration and gives the log store a pleasant finish.

The legs of the garden log store are made from 44×69 mm planks, while the roof pitch is 14°.

Don't forget to check out our garden supplies for everything you need to maintain your outdoor space.

What You Need to Build a DIY Log Store

• 44×69 mm planed timber for the frame
• 22×96 mm tongue-and-groove boards for the roof
• 18×45 mm slats for the louvered panels
• Bitumen waterproofing membrane
• Galvanized screws and brackets
• Three hinges per door panel

For a comfortable workspace, consider our desks and work surfaces to plan your project efficiently.

Carefully Crafted Details for the Outdoor Log Store

To ensure the log store integrates well with the house, the roof was built with a 14° pitch, matching the main building. The bitumen membrane was laid with a 10 cm overlap and secured with galvanized nails with large heads. The front panels were built with a slight overhang to protect the hinges from rain.

Add some ambiance to your outdoor area with outdoor lighting from our collection.

To Build a Log Store, Start with a Design

Before cutting any wood, draw up a detailed plan. Our design was based on a modular structure: three frames 1150 mm wide and 1800 mm high, with a roof overhang of 200 mm on each side. The total depth is 1150 mm, enough to store about 2 cubic meters of firewood.

Make sure your design accounts for the slope of the ground and the wall where the log store will be anchored.

For a sturdy foundation, explore our sheds collection for inspiration on outdoor structures.

Building the Modular Frame of the DIY Log Store

Start by cutting the 44×69 mm planks to size for the vertical posts and horizontal beams. Assemble each frame using galvanized brackets and screws. The three frames are then connected by crossbars at the bottom and roof boards at the top.

Make sure the frames are perfectly square before fixing them together. Use a spirit level to check alignment.

Keep your tools organized with bookcases and shelving units from our furniture range.

Preparing the Louvered Panels

The slats (18×45 mm) are cut to length and fixed to the frames with a 10 mm gap between each slat. This gap ensures optimal ventilation while maintaining privacy. The panels are then attached to the front of the frames with three hinges each, allowing them to swing open for easy access to the firewood.

For a cohesive look, consider matching your log store with outdoor decor from our selection.

Canopy for the Log Store and Wall Fixing

The roof is assembled by laying the 22×96 mm tongue-and-groove boards across the top beams, starting from the lower edge and working upward. Once the boards are fixed, the bitumen membrane is rolled out and nailed down. Finally, the log store is anchored to the house wall using heavy-duty brackets to ensure stability in windy conditions.

Complete your outdoor setup with outdoor patio furniture for a relaxing seating area near your firewood store.

Frequently Asked Questions

How much wood can a DIY log store hold?

A log store measuring 2000×1150×1150 mm can hold approximately 2 to 2.5 cubic meters of firewood, depending on how tightly it's stacked.

Do I need planning permission for a log store?

In most cases, a small log store attached to a house wall does not require planning permission, but it's always best to check local regulations.

What type of wood should I use for the frame?

Pressure-treated softwood like pine or spruce is ideal for outdoor use. For the slats and roof, use planed timber to ensure a neat finish.

How do I keep the firewood dry?

Ensure good ventilation with louvered panels, a waterproof roof with overhang, and store the wood off the ground on crossbars. Avoid stacking wood directly against the house wall.

Can I build a log store without a wall to attach it to?

Yes, you can build a freestanding log store with a pitched roof and four posts. Just make sure it's anchored securely to the ground.

For more ideas, browse our pergolas collection for freestanding outdoor structures.

Browse Grand Goldman Home Decor

Discover unique craftsmanship home decor and furniture at the Grand Goldman Shop.

Best Products We’ve Tested and Rated

Our testing team has hands-on reviews of battery chainsaw, shoes heel spurs, crystal glass cleaner, wheelbarrow concrete, and tattoo machines. Every option below was compared across price, build quality, and real-world performance, with honest pros and cons. We update these guides regularly as new models arrive, so the recommendations stay current.

Our testing team has hands-on reviews of coconut oil oil pulling, training collar stubborn dogs, surf fishing reel, mattress arthritis, and irons. Every option below was compared across price, build quality, and real-world performance, with honest pros and cons. We update these guides regularly as new models arrive, so the recommendations stay current.