DIY Electric Shutter Kit Installation Guide | GrandGoldman.com 2026

There are many things that can make our lives easier, but unfortunately some require major modifications to existing structures or the help of a professional, especially if the new installation needs to be certified. Switching from manual to motorized shutters is not one of them: even a beginner DIYer can manage it without particular problems thanks to a complete electric shutter kit that adapts to any roller width. The kit can be installed on new or existing shutters: you simply remove the old roller around which the shutter winds and replace it with the one provided in the kit, adjustable to all widths between 70 and 230 cm, into which the tubular motor is inserted. The motor comes with a power cable that needs to be connected to an electrical outlet — the only step where you might need an electrician. The cord that runs externally on the wall next to the window is eliminated, and instead of the spring winder, you can install a push button to manually raise or lower the shutter; for added convenience, operation can also be done via remote control.

Components of the Electric Shutter Kit Motor

The two crushed rollers allow you to extend the smooth roller when the width between the two shutter supports exceeds 100 cm; first add the one on the cap side, and if that's not enough, also the one on the motor side. The smooth roller alone is sufficient for measurements between 70-100 cm and must be cut to a size 3 cm less than the measurement taken between the supports.

Roller Assembly Parts

• Smooth roller – the main tube that houses the motor
• Extension rollers – used for wider installations
• Motor cap side – the end cap that holds the motor in place
• Motor side – where the motor connects to the power and control

First Operation: Disassembly

Before starting, make sure you have the right tools: a screwdriver, a tape measure, a saw (for cutting the roller to size), and possibly a ladder. Start by removing the old shutter cord and spring mechanism. Then unscrew the supports that hold the roller in place. Carefully pull the old roller out of the shutter box. This is also a good time to inspect the shutter slats and the box for any damage. If you're also upgrading your home improvement tools, consider adding a quality cordless screwdriver to your kit.

Mounting the Components

Once the old roller is removed, measure the distance between the two supports. Cut the smooth roller to a length 3 cm shorter than this distance. Insert the tubular motor into the smooth roller, making sure the motor cable comes out from the correct side. Attach the cap on the motor side and the support on the opposite side. Slide the roller into the shutter box and secure it to the supports. Connect the motor cable to a power source — if you're not comfortable with electrical work, hire a licensed electrician. Finally, install the push button or pair the remote control. For a clean look, you can hide the wiring behind wall decor or run it through a cable channel.

Frequently Asked Questions

Can I install an electric shutter kit on any type of shutter?

Yes, most kits are designed to work with standard roller shutters. However, you should check the compatibility of the roller diameter and the width range (typically 70-230 cm) with your existing setup.

Do I need an electrician to install the kit?

If you are comfortable with basic electrical connections, you can connect the motor to an existing outlet yourself. For new wiring or if you are unsure, it's best to hire a professional electrician to ensure safety and compliance with local codes.

How long does the installation take?

For a DIYer with basic skills, the installation typically takes 1-2 hours per shutter. The most time-consuming part is removing the old roller and cutting the new one to size.

Can I still use the shutter manually if the power goes out?

Most electric shutter kits include a manual override function, usually a crank or a pull cord, so you can operate the shutter even during a power outage.

What maintenance does an electric shutter require?

Periodically check the motor and roller for dust and debris. Lubricate the moving parts once a year with a silicone-based lubricant. Also, test the remote control batteries and replace them as needed.

Additional Tips for a Successful Installation

• Always measure twice before cutting the roller.
• Use a level to ensure the supports are perfectly aligned.
• If your window frame is uneven, use shims to level the supports.
• For outdoor shutters, consider adding outdoor lighting near the window for better nighttime visibility.
• Pair your new motorized shutters with smart home devices for voice control and scheduling.

Once your shutters are installed, you might also want to refresh the room with new curtains or rugs to complement the modern look. For the bedroom, consider upgrading to a new bed frame and mattress for the ultimate comfort. And don't forget to add some indoor lighting to highlight your new automated windows.

Browse Grand Goldman Home Decor

Discover unique craftsmanship home decor and furniture at the Grand Goldman Shop.

Best Products We’ve Tested and Rated

Our testing team has hands-on reviews of treeless saddle, spine protector skiing, padded shorts snowboarding, low volume ski boots, and gifts outdoorsy girlfriend. Every option below was compared across price, build quality, and real-world performance, with honest pros and cons. We update these guides regularly as new models arrive, so the recommendations stay current.

Our testing team has hands-on reviews of cooler rafting, composting toilet van life, chest pack hunting, backcountry ski gloves, and touring stand up paddle board. Every option below was compared across price, build quality, and real-world performance, with honest pros and cons. We update these guides regularly as new models arrive, so the recommendations stay current.