How to Install a Door: A Complete DIY Guide 2026

Installing a new door refreshes the look of your apartment with just a few hours of work. If the job can be done by a skilled DIYer, you can also save a considerable amount of money. Door kits allow for easy assembly with the help of a few tools that any home improvement enthusiast will have in their workshop. You only need a screwdriver and possibly a pair of pliers to tighten the anuba hinges. Pre-marked holes and interlocking joints make relative positioning of parts simple. Wall fixing is done with through-screws and polyurethane foam. For all your home improvement needs, GrandGoldman has the tools and supplies to get the job done right.

Frame and Trim All in One Kit

All parts are pre-finished and require only careful assembly. Some trim parts are already attached to the frame to speed up assembly. Before purchasing, even at DIY centers, you need to check the width of the rough frame hidden under the old door to ensure it is a standard size (70, 80, or 90 cm internal width and 215 cm height). The pre-assembled frame is inserted into the opening and fixed with screws and polyurethane foam. Check out our sheds and greenhouses for other great DIY projects.

Pre-Drilled Parts Ensure Speed and Sturdiness

The joining of the frame parts is ensured by through-screws at the boards. The edges are shaped with interlocking joints that make assembly very precise. The frame is held together at the corners by a special screw with a cylinder, of the type used for furniture assembly, which makes the joint particularly strong. For your next project, explore our desks and work surfaces for a perfect workspace.

No Compromise on Angles and Verticality

The assembled frame is positioned inside the rough opening and plumbed on both sides, locking it with clamps or wedges. The door is mounted on the hinges and checked to ensure it closes well without excessively wide gaps at the stop or, conversely, friction. Enhance your home with wall decor and mirrors from GrandGoldman.

For Final Fixing, Secure Every Part

The correct position of the frame is maintained thanks to a "register" — a strip placed between the frame and rough frame, which is crossed by the fixing screws at the nominal width. Wooden wedges, inserted between the wall and the outside of the frame, lock the frame in position. With other wedges, the frame is immobilized against the lintel, constantly checking verticality with a level on both the internal wall and the side. Very wide frames are fixed with polyurethane foam. For more home projects, browse our beds and mattresses for a complete bedroom refresh.

Tips for a Perfect Door Installation

• Always measure the rough opening before buying your door kit to ensure it fits standard sizes.
• Use a quality level to check both vertical and horizontal alignment during installation.
• Apply polyurethane foam sparingly — it expands and can warp the frame if overused.
• Let the foam cure fully before trimming any excess for a clean finish.

Frequently Asked Questions

What tools do I need to install a door kit?

You typically need a screwdriver, pliers, a level, wedges, and clamps. Polyurethane foam and through-screws are also essential for securing the frame. For other home tasks, check out our lighting and curtains collections.

Can I install a door myself if I'm a beginner?

Yes, modern door kits are designed for DIY assembly with pre-drilled holes and interlocking joints. However, careful measuring and leveling are crucial for a professional result. For outdoor projects, explore our garden supplies and pergolas.

How do I ensure the door closes properly?

After mounting the door on its hinges, check for even gaps around the edges. Adjust the frame position with wedges until the door swings freely without binding. For more comfort, consider outdoor patio furniture and BBQ grills for your outdoor space.

What if my rough opening is not a standard size?

You may need to adjust the rough opening with shims or trim the door panel. If the gap is too large, filling with foam and adding trim can create a finished look. For more ideas, browse our outdoor decor and outdoor lighting collections.

How long does it take to install a door?

For an experienced DIYer, installing a door kit takes about 2-4 hours, including measuring, assembly, and final adjustments. First-time installers may need a full afternoon. For other quick upgrades, see our rugs and storage benches.

Browse Grand Goldman Home Decor

Discover unique craftsmanship home decor and furniture at the Grand Goldman Shop.