DIY Iron Plant Stand with Dodecagonal Base – A Sturdy & Elegant Project 2026

Paulo Vivere
DIY Iron Plant Stand with Dodecagonal Base – A Sturdy & Elegant Project
This page may contain affiliate links.

Placed in the entryway or a corner of the living room, this DIY iron plant stand is truly imposing. It is built entirely from 3 mm thick, 20 mm wide flat iron bar: with this material you will make the twelve uprights and the four dodecagonal rings that lock the uprights in place. The first ring locks the uprights at the base with a diameter of about 267 mm; the third ring, with the same diameter, locks them just before the curl begins. The second ring has a diameter of about 210 mm and is positioned just above the central Z-bend; the fourth ring, the largest, with a diameter of 372 mm, secures the curls that protrude outward from the pot.


DIY project photo
All rings are drilled at the center of each vertex to receive the bolts and nuts that connect them to the uprights. The only point where a welder might be needed is when joining the ends of the four rings to close them, but you can avoid this by leaving them 25 mm longer, filing the ends at a slant (flute-beak style), overlapping them so they don't create thickness, bonding them with epoxy adhesive, and reinforcing the joint with a rivet.


Furniture with Meaning.

Find Original Home Decor sparking conversation at Grand Goldman Shop.


While assembling this DIY home improvement project is fairly straightforward, the jigs and counter-forms in iron – essential for bending the uprights into a Z-shape at the center, giving them the soft curve that distinguishes the lower part, and creating the twelve curls at the ends – require more construction effort.

ADVERTISEMENT

The model of this curved iron plant stand can be transformed into an umbrella stand: simply add a sheet metal tray at the bottom for umbrellas to rest and drip dry. By making the vertical pieces longer and adding two more rings to strengthen the structure, you can turn it into an entryway coat rack. For more inspiration, explore our wall decor and outdoor decor collections.

What You Need to Make the DIY Iron Plant Stand

Iron and Curling Jig

  • Flat iron bar: 3 mm thick, 20 mm wide (approximately 12 meters total for uprights and rings)
  • Bolts and nuts (M5 or similar, about 48 sets)
  • Epoxy adhesive and rivets for ring joints (if not welding)
  • Jig materials: scrap iron or steel for bending forms and counter-forms
  • Basic tools: hacksaw or angle grinder, drill with metal bits, files, clamps, measuring tape, marker
  • Optional: workbench lighting for better visibility

Assembly of Rings and Uprights

Start by cutting the flat iron into twelve upright pieces (each about 1 meter long) and four ring pieces (calculate circumference based on desired diameters, then add 25 mm for overlap). Bend each upright using your jig: first create the central Z-bend, then the lower curve, and finally the top curl. For the rings, mark twelve equal segments on each strip, drill a hole at each mark, then bend into a dodecagon shape using a simple bending jig. Close each ring with epoxy and a rivet. Finally, assemble by bolting the rings to the uprights at the marked heights. For a sturdy base, consider pairing this stand with a storage bench or area rug in your entryway.

Frequently Asked Questions

Can I build this plant stand without welding?

Yes! The rings can be closed using epoxy adhesive and a rivet instead of welding. All other connections use bolts and nuts, making this a fully weld-free project. For additional garden supplies and DIY-friendly materials, check our selection.

What type of pot or vase does this stand hold?

The stand is designed for a pot with a base diameter of approximately 250–270 mm. The fourth ring (372 mm diameter) cradles the upper part of the pot or a decorative vase. You can find suitable planters in our outdoor patio furniture collection.

ADVERTISEMENT

How can I modify this design for an umbrella stand or coat rack?

To make an umbrella stand, add a metal drip tray at the base. For a coat rack, extend the uprights by 30–40 cm and add two more rings for stability. Browse our mirrors and curtains for complementary entryway upgrades.

What is the best way to bend the iron without kinking?


DIY project photo
Use a sturdy jig with a radius of at least 20 mm for curves. Heat the iron slightly with a torch if needed, or bend cold using a bench vise and hammer. For precision, consider using a home improvement bending tool from our shop.

Can I paint or finish the iron plant stand?

Absolutely! After assembly, sand all surfaces, apply a rust-inhibiting primer, and finish with spray paint or brush-on enamel in your preferred color. For a modern look, pair with sofas or dining tables from our furniture collection.



Browse Grand Goldman Home Decor

Discover unique craftsmanship home decor and furniture at the Grand Goldman Shop.

ADVERTISEMENT
Grand Goldman home decor best trampolines decor for every home | stylish trampolines accessories online | affordable trampolines for any room | best treadmills decor for every home | stylish treadmills accessories online | affordable treadmills for any room | trending weight racks ideas for home | best weight racks for small spaces | affordable weight racks under budget | trending weight benches ideas for home | best weight benches for small spaces | affordable weight benches under budget | espresso wall mounted coat rack | wooden entryway storage shelf | 4 dual hook entry organizer | 3 in 1 entryway hall tree | storage bench with coat hooks | black shoe storage organizer | grey power reclining sofa set | 3 piece leather recliner couch | modern sectional reclining sofa | modern executive computer desk | wooden storage cabinet desk | large office desk with doors |

Best Products We’ve Tested and Rated

Our testing team at work

Our testing team has hands-on reviews of surf rods, saltwater rods, monofilament line, gift fisherman, and waders men women. Every option below was compared across price, build quality, and real-world performance, with honest pros and cons. We update these guides regularly as new models arrive, so the recommendations stay current.

Our testing team has hands-on reviews of pliers freshwater saltwater, lures trout, lures, bait trout, and rod brands. Every option below was compared across price, build quality, and real-world performance, with honest pros and cons. We update these guides regularly as new models arrive, so the recommendations stay current.

ADVERTISEMENT
Paulo Vivere

Author

Paulo Vivere

Paulo Vivere is a pest control specialist and Grand Goldman writer, sharing practical, research-backed guidance on pest prevention, identification, and safe home solutions.


SPONSORED

Get Lifetime Access to the Lastest Movies, with Exclusive Offers & Free Express Order Delivery.

ADVERTISEMENT