Essential Tools for Installing Parquet Flooring Like a Pro 2026

Installing parquet flooring doesn't require a massive toolbox, but precision is everything. Whether you're laying floating, glued, or nailed parquet, the one truly indispensable tool is a very sharp saw for clean, accurate cuts. Ideally, a bench saw with a rail and angled guide is best for cutting wide planks and ripping them lengthwise. But with the right accessories, you can also use other cutting tools. Saw blades must have carbide-tipped teeth to deliver clean, chip-free cuts. Carbide lasts a long time on natural wood or plywood but can wear faster on laminate parquet due to its high density and coatings.

What You Need to Know About Parquet Installation Tools

The first sanding (called leveling) is done a few days after installation. It involves rough sanding with a drum sander and coarse abrasives, filling imperfections and leveling differences, then re-sanding with fine grit and finishing with a single-brush polisher using progressively finer abrasive papers.

For these tasks, professional-grade large sanders are used, which can also be rented. They speed up the work, reduce fatigue, and deliver a uniform result, allowing you to work standing up.

Bench Circular Saw

For straight, linear, and angled cuts, this is the ideal tool. The blade is a few millimeters thick, so you need to keep it flush with the outer edge of your cutting line. If you're tackling a full room renovation, check out our home improvement collection for all the gear you need.

Saw Guide

Used on the floor, it offers a wide, flat support surface and a stop for the plank, which is locked in place by lowering the guide bar on which the saw slides. This is a game-changer for precision work.

Guillotine Cutter

This is a simple but effective tool. The blade cuts like a guillotine, sliding between two steel sides. During the cut, it removes a thin sliver just a few millimeters wide. Perfect for quick, clean crosscuts.

Comb Saw

The side handle allows you to use the fine-toothed blade for detailed cuts. It's especially useful for trimming around corners and obstacles.

Router

A router is excellent for creating clean edges and grooves, especially when fitting planks around door frames or irregular shapes. For routing and other fine woodworking, you might also appreciate our wall decor selection for finishing touches.

Circular Openings

For cutting circular openings (e.g., for pipes), a hole saw or a jigsaw with a fine wood blade works best. Always cut from the back side of the plank to minimize chipping on the visible surface.

Essential Marking

Accurate marking is fundamental. Use a carpenter's square, a marking gauge, and a sharp pencil. Measure twice, cut once. For marking and layout, a sturdy work surface or desk can make a big difference in keeping your plans organized.

Frequently Asked Questions

What is the most important tool for laying parquet?

The most important tool is a sharp saw with carbide-tipped teeth. A bench circular saw with a guide is ideal for straight and angled cuts, but a good jigsaw or guillotine cutter can also work for specific tasks.

Can I install parquet without professional tools?

Yes, for small projects you can use a handsaw or jigsaw, but for large areas and a professional finish, a power saw and a saw guide are highly recommended. Renting professional sanders is also a good option for the finishing stage.

How do I cut parquet around pipes?

Use a hole saw attached to a drill for the circular cut, or a jigsaw for more irregular shapes. Always cut from the back of the plank to avoid chipping the visible side. For the overall project, consider our home improvement supplies for everything from tools to finishing materials.

What kind of saw blade should I use for laminate parquet?

Use a carbide-tipped blade with a high tooth count (60-80 teeth) designed for laminate or non-ferrous metals. This minimizes chipping and extends blade life.

Do I need to sand new parquet?

Pre-finished parquet does not need sanding. Unfinished parquet requires sanding after installation to level the floor and prepare it for sealing. For the sanding phase, you might want to browse our home improvement tools for sanders and abrasives.

Final Tips for a Flawless Parquet Floor

• Always acclimate your parquet planks in the room for at least 48 hours before installation.
• Use a moisture barrier underlayment for concrete subfloors.
• Leave a 10-15mm expansion gap around the perimeter of the room.
• Stagger the end joints of planks by at least 30cm for stability and aesthetics.
• For a comfortable workspace, consider adding a soft rug in adjacent rooms to protect your knees and tools.

With the right tools and a bit of patience, you can achieve a stunning parquet floor that will last for decades. For all your installation needs, from saws to sanders, don't forget to explore our home improvement collection and garden supplies for any outdoor projects.

Browse Grand Goldman Home Decor

Discover unique craftsmanship home decor and furniture at the Grand Goldman Shop.

Best Products We’ve Tested and Rated

Our testing team has hands-on reviews of tire pressure gauge, ski gloves, hummingbird feeders, sewing machine quilting, and harness cairn terrier. Every option below was compared across price, build quality, and real-world performance, with honest pros and cons. We update these guides regularly as new models arrive, so the recommendations stay current.

Our testing team has hands-on reviews of gifts grandparents, wax melts, baby swing, bait mouse traps, and jackbox party pack. Every option below was compared across price, build quality, and real-world performance, with honest pros and cons. We update these guides regularly as new models arrive, so the recommendations stay current.