How to Renew Door Handles with SACAR Products | DIY Guide 2026

After years of service and daily use, the finish on many door handles and plates loses its luster or becomes worn. It's well known that the plate, tightened by screws, leaves its imprint on the wood, sometimes forming a slight depression. It's not guaranteed that a new plate, even if similar, will completely cover it. You can only be sure by choosing handles from Sacar, which feature oversized plates in height and width to hide marks in every circumstance.

Whether you're tackling a full home improvement project or just refreshing a few rooms, replacing handles is a quick win. The special renovation plates for doors and windows have heights of 265 mm and 189 mm and are slightly wider than standard ones. Additionally, the door handle has its own return spring, so it always stays perfectly horizontal when at rest, even if the lock mechanism has lost some fluidity.

Replace Door and Window Handles

Start by loosening the 4 screws that hold the plate in place. As you slide the old handle off the spindle, the obvious imprint left by the old plate becomes visible. The new renovation handle from Sacar, even if similar in design, uses a slightly larger plate for a perfect aesthetic result.

You will need to set new holes for the screws. Position the new plate and mark the spots with an awl. If you're working with hard wood, prepare a small pilot hole with a bradawl. The only measurement you must verify before replacement is the distance between the center of the spindle and the keyhole. If the spindle has a different section, special adapters are available separately.

Once you've completed the operation on one side and tested the lock's correct function, repeat the steps on the other side. For window handles, the operation is even simpler and faster.

Tools and Materials You Might Need

• New SACAR renovation handles with oversized plates
• Screwdriver (manual or electric)
• Awl or bradawl for marking new screw positions
• Measuring tape to check spindle-to-keyhole distance
• Spindle adapters if needed

Choosing the Right Style for Your Home

Updating your hardware can completely transform the feel of a room. While you're working on doors, consider how other elements of your space tie together. For a cohesive look, you might want to browse wall decor to complement your new handles. In living areas, matching your hardware finish to sofas or rugs can create a polished, designer feel.

For bedrooms, new handles on closet doors pair beautifully with updated nightstands and beds. In the kitchen, consider how cabinet hardware works with your kitchen islands and carts for a unified look.

Outdoor Considerations

Don't forget exterior doors! Durable handles are essential for garden supplies sheds and greenhouses. For patio doors, consider how your hardware works with your outdoor patio furniture and outdoor lighting to create a seamless indoor-outdoor flow.

Frequently Asked Questions

How do I know if SACAR renovation plates will cover old marks?

SACAR plates are specifically designed with oversized dimensions (265 mm and 189 mm heights) that are slightly wider than standard plates. This ensures they cover any imprints or discoloration left by previous hardware.

What if the spindle size doesn't match my new handle?

If the spindle has a different section than your new handle, you can purchase special adapters separately. Always measure the distance between the spindle center and the keyhole before purchasing new handles.

Can I replace window handles the same way as door handles?

Yes, but window handle replacement is even simpler and faster. The same oversized plate principle applies, making it easy to cover old marks without additional preparation.

Do I need special tools for this project?

Basic tools include a screwdriver and an awl or bradawl for marking new screw positions. For hard wood, a small drill bit for pilot holes is recommended. No specialized tools are required.

Will these handles work with any lock mechanism?

SACAR handles have their own return spring, so they work well even with older lock mechanisms that may have lost some fluidity. The handle stays perfectly horizontal when at rest regardless of the lock condition.

Final Tips for a Professional Finish

Complete the operation on one side first and test the lock function before moving to the other side. For the best results, consider updating all the hardware in your home at once. While you're at it, explore lighting options to brighten your refreshed spaces, and don't forget curtains and mirrors to complete your room makeover.

For home offices, matching your door hardware to desks and work surfaces and office chairs creates a professional, cohesive workspace. In dining areas, coordinate with dining tables and display shelving for an elegant finish.

Browse Grand Goldman Home Decor

Discover unique craftsmanship home decor and furniture at the Grand Goldman Shop.