DIY Candle Holders: How to Make a Hanging Copper Chandelier 2026

Create a slender and elegant DIY hanging copper candelabra for your dining table for under €25. This project uses basic plumbing supplies and a few tools to craft a stunning centerpiece.

What You Need to Create DIY Candle Holders

Copper elements (Ø 22 mm):

• 2 tubes, 1000 mm each
• 2 90° elbows
• 4 T-connectors
• 2 end caps
• 4 reducers to 28 mm

Other parts:

• 2 metal rings
• 2 lengths of metal chain (length depends on ceiling height)
• Copper-colored spray paint
• Epoxy adhesive for metals
• 4 candles
• Wall plugs with suspension hooks

Bosch tools:

• Multi-cutter PMF 220 CE with segment blade ACZ 85 EB
• Roller sander PRR 250 ES with flap wheel
• Impact drill UniversalImpact 800 with Drill Assistant dust collection accessory

How to Make the DIY Candle Holder

Working with Copper

To get comfortable with this material, we recommend reading our guide on working with copper. After cutting from the tube 7 pieces 90 mm long (intermediate base pieces + 2 central candle holders), 2 pieces 160 mm long (side candle holders), and 2 pieces 500 mm long (suspension elements), you need to deburr the edges that could make insertion into the fittings difficult. To prevent the pieces from rotating after assembly, spread a thin layer of epoxy adhesive on the ends of the tube sections.

Make sure the fittings are perfectly aligned before the adhesive sets, so that both the hanging candle holders and the suspension extensions are perfectly perpendicular to the base. Even a slight misalignment would be noticeable, especially in the longer pieces.

With the piece firmly clamped (taking care not to deform it), make the cut using a multi-cutter tool. For a clean finish, use a roller sander to smooth any rough edges.

Assembly Steps

1. Prepare the base: Connect the 90 mm pieces with T-connectors to form a rectangular base. Use epoxy adhesive at each joint.
2. Add the candle holders: Attach the 160 mm side pieces and the remaining 90 mm center pieces to the T-connectors. Fit the reducers and end caps on top to hold the candles.
3. Attach suspension elements: Connect the 500 mm pieces to the elbows at each end of the base. These will hang from the ceiling.
4. Paint and finish: Spray the metal rings and chain with copper-colored spray paint to match the copper tubes. Let dry completely.
5. Hang the chandelier: Install wall plugs with hooks in the ceiling. Attach the chains to the rings and then to the suspension elements. Adjust the height as desired.

For a cohesive look, consider adding matching lighting fixtures or wall decor to complement your new copper chandelier.

Frequently Asked Questions

Can I use this candle holder outdoors?

Yes, but make sure to use outdoor-rated candles and protect the copper from the elements. You might also want to pair it with outdoor lighting for a complete patio setup.

How do I clean copper candle holders?

Wipe with a soft cloth and mild soap. For tarnish, use a mixture of lemon juice and baking soda. Avoid abrasive cleaners.

What type of candles should I use?

Standard taper candles work best. For safety, always use candles that fit snugly into the holders. You can find candle accessories at GrandGoldman.

Can I adjust the height of the chandelier?

Yes, simply change the length of the chain. Measure your ceiling height before cutting the chain to ensure the chandelier hangs at the desired level.

Is this project suitable for beginners?

With basic DIY skills and the right tools, this is an achievable weekend project. Start with our home improvement guides for more tips.

For more inspiration, browse our collections of dining tables, kitchen islands, and sofas to complete your dining room makeover.

Browse Grand Goldman Home Decor

Discover unique craftsmanship home decor and furniture at the Grand Goldman Shop.